Gold Stamping Water Transfer Decals for Ceramic Tableware

The waterslide transfer decal for ceramic tableware comprises three layers: The color, or image layer, which comprises the decorative design; The covercoat, a clear protective layer, which may incorporate a low-melting glass; And the backing paper on which the design is printed by screen printing.

Material:water slide tansfer decal paper
Paper baseweight:175gsm
Process Size:390*540mm,500*700mm
Process:silk screen printing,gold foil stamping
Decal type:high temperature
Ceramic decal firing temperature:540-1300℃
Application:ceramic tableware,ceramic dinnerware,ceramic plates,mugs,bowls,etc
Ceramic decal customization:it needs to supply the pattern file of decals for ceramics

The features of waterslide decals for tableware:

1.Environmental non-toxic;
2.The ceramic decal patterns are vivid;
3.Scratch resistant and strong adhesion;
4.Knockout speed of paper is quick;

How to use the waterslide decals for ceramic tableware:

Stage 1: Wipe the ceramic tableware that you want to stick clean (no duration time requirement, clean is ok).
Stage 2: Cut one pattern from the 50cm*70cm high temperature decal paper (no duration time requirement, cutting well is ok).
Stage 3: Soak and wet the cutted pattern completely in water for 3-5 seconds (wet completely is ok), warm water(20C-30C) needs to be used in winter.
Stage 4: Place the pattern onto the correct position of the ceramic tableware, wait for 1-2 minutes before moving the base paper, If not movable, wet completely again. If movable, move the base paper away carefully in one direction.
Stage 5: After moving the base paper, the pattern has been transfer printed on the ceramic tableware, then squeeze out completely any excess water and air bubble with rubber or other tools (no duration time requirement, squeezing out completely is ok).
Stage 6: Dry the water around the pattern with dry towel (no duration time requirement, dry is ok).
Stage 7: Place the ceramic tableware has been printed pattern into a oven, then curing(baking) time in small oven is 2 hours ( from heating to cooling), the curing temperature is 780C-800C.
Noted; The high temperature ceramic decals need positive stick, that means the side of the pattern must face up or face to the operator(users).