Gold Water Transfer Decals for Ceramic Sanitary Ware

The waterslide transfer decals for ceramic sanitary ware comprises three layers: The color, or image layer, which comprises the decorative design; The covercoat, a clear protective layer, which may incorporate a low-melting glass; And the backing paper on which the design is printed by screen printing.

Material:water slide tansfer base paper
Paper baseweight:175gsm or others
Process Size:390*540mm,500*700mm
Sampling Time of ceramic basin decals:one week
Process:silk screen printing,gold foil stamping
Decal type:high temperature ceramic decals
Firing temperature:sanitary ware decals for killen temperature 700-800c
Application:ceramic sanitary ware in bathroom
Ceramic decal customization:it needs to supply the pattern file of decals for ceramics

The features of gold waterslide decals for sanitary ware:

1.Available colors:ordinary color,fake gold,real gold;
2.The ceramic decal patterns are vivid;
3.Scratch resistant and strong adhesion;
4.Knockout speed of paper is quick;

How to use waterslide transfer decals for ceramic sanitary ware:

Stage 1: Wipe the ceramic sanitary ware that you want to stick clean (no duration time requirement, clean is ok).
Stage 2: Cut one pattern from the 50cm*70cm high temperature decal paper (no duration time requirement, cutting well is ok).
Stage 3: Soak and wet the cutted pattern completely in water for 3-5 seconds (wet completely is ok), warm water(20C-30C) needs to be used in winter.
Stage 4: Place the pattern onto the correct position of the ceramic sanitary ware, wait for 1-2 minutes before moving the base paper, If not movable, wet completely again. If movable, move the base paper away carefully in one direction.
Stage 5: After moving the base paper, the pattern has been transfer printed on the ceramic sanitary ware, then squeeze out completely any excess water and air bubble with rubber or other tools (no duration time requirement, squeezing out completely is ok).
Stage 6: Dry the water around the pattern with dry towel (no duration time requirement, dry is ok).
Stage 7: Place the ceramic sanitary ware has been printed pattern into a oven, then curing(baking) time in small oven is 2 hours ( from heating to cooling), the curing temperature is 780C-800C.
Noted; The high temperature ceramic decals need positive stick, that means the side of the pattern must face up or face to the operator(users).